0086-311-83095058
hbyida@rebar-splicing.com 
Tsaga-kulle Rebar Connection System
Takaitaccen Bayani:
Tsaga-kulle ma'aurata tsarin haɗin gwiwa ne na inji. Tsarin ya kasu kashi biyu:tsaga-kulle ma'auratada YD-JYJ-40 tsaga-kulle clamping inji. Ya dace da haɗin haɗin ginin rebars, kuma ginin yana da sauƙi kuma mai dacewa, kuma ana iya amfani da shi a wurin da manyan sandunan ƙarfe na sama da na ƙasa suna adawa da juna ko kuma akwai tazara. Har ila yau ana haɗa haɗin haɗin gwiwa ta hanyar zaren inji, don haka buƙatar ƙarfin extrusion kadan ne. Idan aka kwatanta da sauran samfurori, tsarin kulle hannun rigar taper yana da mafi girman juriya ga matsayi na ƙarfafawa a kwance.
Ana iya daidaita ƙarfin extrusion a ainihin lokacin.
●Gane ikon nesa.
●Komawa ta atomatik bayan kai matsi.
●Matsakaicin nauyin matsi shine 19kg.
● Ana iya duba ingancin haɗin haɗin gwiwa da gani.
●Matsi yana sarrafa fitar da hankali.
●Bayan an gama shigarwa, za a duba shi ta hanyar ma'aunin caliper.
● Ma'aunin ma'auni tare da ma'ana zai iya daidaitawa zuwa cikakken kewayon ƙayyadaddun hannun riga.
| YD-JYJ-40Babban Ma'aunin Fasaha | |
| Matsakaicin Ragewa | 16mm-40mm |
| MotociPoyar | 4.0kW |
| AikiPoyar | 380V 3Pda 50 Hz |
| Hanyar sarrafawa | Maɓallai da sarrafa nesa |
| Matsayin Matsi | 63MPa |
| Matsakaicin Matsi na Extrusion | 200kN |
| Nauyin Gidan Mai | 80kg |
| Latsa ma'aunin nauyi | Yanayin ƙarfafa-Layer guda ɗaya 19kg Yanayin ƙarfafa Layer biyu 29kg |
| Karfin Tankin Mai | 36l |
| Yawan Yawo | 17 l/min |
| Girman Pump Mai | 720mm × 530mm × 1060mm |
| Danna Matsakaicin Girma | 210mm × 120mm × 520mm |
Girman Hebei Yida mai raba kulle-kulle
| Girman(mm) | OD(mm) | TsawonOf LockingPice(mm) | Nauyi(kg) |
| 16 | 31 | 48 | 0.16 |
| 18 | 35 | 54 | 0.24 |
| 20 | 38 | 58 | 0.31 |
| 22 | 43 | 62 | 0.41 |
| 25 | 50 | 70 | 0.72 |
| 28 | 54 | 80 | 0.92 |
| 32 | 60 | 90 | 1.30 |
| 36 | 68 | 100 | 1.97 |
| 40 | 74 | 110 | 2.54 |
