0086-311-83095058
hbyida@rebar-splicing.com 
GD-150 Mīkini Hoʻopiʻi Aunoa
ʻO ka wehewehe pōkole:
ʻO ka hoʻopaʻa ʻana i ka ʻenehana Parallel Thread
mīkini hana
1. (GD-150Automaticmīkini ) Rebar AunoaHoʻopauHuhūKe kalaiwa anaMīkini
| Mīkini hoʻoheheʻe ʻia | Ke ano | BDC-Aunoa 1 |
| Ka nui Rebar kūpono (mm) | 16-40mm | |
| Voltage: | 380V/3 Māhele/50Hz | |
| Nom. Ka Manaʻo Huka (kN) | 2000 | |
| Ana (mm) | 1300*680*1400 | |
| Kaumaha (kg) | 850KG | |
| Pum Hydraulic | Ke ano | XB6.3/80 |
| Nom. ʻaila kaomi (Mpa) | 80-90 | |
| Nom. Kahe (L/min) | 10.00 | |
| Ka mana o ke kaʻa nui (kw) | 7.5 (380V/3 Māhele/50HzA i ʻole i hana ʻia) | |
| Ana (mm) | 800*550*900 | |
| Kaumaha (kg) | 150KG |
ʻO kēia mīkini ka mīkini hoʻomākaukau no ka pilina rebar i ka hana kūkulu. ʻO kāna hana nui, ʻo ia ka hana ʻana i ka ʻāpana hope o ka rebar e hoʻokiʻekiʻe i ka wahi rebar a no laila e hoʻonui i ka ikaika o ka hopena rebar.
2. (GZL-45 Mīkini Kaʻa )Pā kilaKaulikeLoko ʻOkitingMīkini
| Laulā anawaena o ka rebar: | φ16－φ40 |
| ʻO ka māmā ʻoki ʻana i ke kaula | 32r/min |
| Ka māmā holo hope | 64r/min |
| Ka mana kaʻa uila: | 2.4/3KW |
| ʻOki ʻana i ka mamao o ka neʻe ʻana o ke poʻo: | 150mm |
| Ka nui o waho (mm): | 1325×570×1070mm |
| Kaumaha: | 537Kg |
Hoʻohana ʻia kēia mīkini e ʻoki i ke kaula no ka hopena rebar ma hope o ka hoʻoheheʻe ʻana i ke anu.
3.Rebar Couplers
Pono:
| l Hāʻawi ka hiʻohiʻona Bar-break i ka hoʻolōʻihi piha ʻana.l ʻAʻole hoʻemi ʻia ka ʻāpana ʻāpana ʻāpana. |  |
ʻO nā ʻāpana o nā mea hoʻohui Upsetting maʻamau:
| Nui | Loko | D(±0.5)mm | L(±1) mm | P | Kaumaha(Kg) |
| Φ16 | M20 | 26 | 40 | 2.5 | 0.09 |
| Φ18 | M22 | 29 | 44 | 2.5 | 0.114 |
| Φ20 | M24 | 32 | 48 | 3 | 0.16 |
| Φ22 | M27 | 36 | 52 | 3 | 0.207 |
| Φ25 | M30 | 40 | 60 | 3.5 | 0.32 |
| Φ28 | M33 | 44 | 66 | 3.5 | 0.398 |
| Φ32 | M36 | 50 | 72 | 4 | 0.62 |
| Φ36 | M39 | 56 | 80 | 4 | 0.875 |
| Φ40 | M45 | 62 | 90 | 4 | 1.138 |
Mea o ka rebar coupler mea No.45 kila.
Ke kumu hana:
1, ʻO ka mua, hoʻohana mākou i ka mīkini ʻoki rebar GQ50 e hoʻopili i ka hopena o ka rebar.
2, ʻO ka lua, hoʻohana mākou i ka Upset Forging Parallel Thread Machine (GD-150 Automatic Machine) e hana i ka hopena o ka rebar.
3. ʻO ke kolu, hoʻohana mākou i ka Parallel Thread Cutting Machine (GZ-45 Automatic Machine) e wili i nā wēlau o ka rebar i hana ʻia.
4. ʻO ka ʻehā, hoʻohana ʻia kahi mea hoʻohui e hoʻopili ai i nā ʻaoʻao ʻelua o ka rebar ma ke kaula like.
AhahuiPōmaikaʻi
1. ʻAʻole koi ʻia ka torque wrench.
2. Hoʻopaʻa ʻia ka hui ma ka nānā ʻana.
3. Ka hana ʻana i nā mea hoʻohui ma lalo o nā hoʻolālā koʻikoʻi.
4. Hoʻolālā ISO Parallel Metric Thread maʻamau.
ʻŌlelo:
Wahi a ke kūlana Kina GB 1499.2-2007,
no ka rebar HRB400: Tensile strength≥54t0Mpa, Hua ikaika≥400Mpa;
no ka rebar HRB500:Tensile strength≥630Mpa, Yeild strength≥500Mpa.
ʻAʻole hiki ke hoʻohana wale ʻia ka ʻenehana hoʻopili ʻana i ka hoʻopili ʻana o HRB400, akā no nā rebar ʻē aʻe, e like me HRB500, ʻoi aku ka ikaika o ka tensile ma mua o 700Mpa a pēlā aku.
