0086-311-83095058
hbyida@rebar-splicing.com 
I-GD-150 Automatic Upset Forging Machine
Incazelo emfushane:
Ukucasula Ukuqamba I-Parallel Thread Technology
Umshini Wokucubungula
1. (GD-150OkuzenzakalelayomaticUmshini) Ibha ye-AutomaticQedaDumelaUkuqambaUmshini
| Umshini wokugcwalisa uwoyela | Imodi | I-BDC-Auto 1 |
| Usayizi webha ofanelekayo (mm) | 16-40 mm | |
| Amandla kagesi: | 380V/3 Isigaba/50Hz | |
| Nom. I-Upset Force (kN) | 2000 | |
| Ubukhulu (mm) | 1300*680*1400 | |
| Isisindo (kg) | 850KG | |
| Iphampu yeHydraulic | Imodi | I-XB6.3/80 |
| Nom. Ingcindezi kawoyela (Mpa) | 80-90 | |
| Nom. Ukugeleza (L/min) | 10.00 | |
| Amandla Enjini Enkulu (kw) | 7.5 (380V/3 Isigaba/50HzNoma ngokwezifiso) | |
| Ubukhulu (mm) | 800*550*900 | |
| Isisindo (kg) | 150KG |
Lo mshini uwumshini olungiselela ukuxhunywa kwe-rebar emsebenzini wokwakha. Umsebenzi wayo oyinhloko uwukwenza ingxenye yokugcina ye-rebar ukuphakamisa indawo ye-rebar futhi ngenxa yalokho kwandise amandla okuphela kwe-rebar.
2. (I-GZL-45 Auto Machine)Ibha yensimbiUkuhambisanaUchungechunge SikatingUmshini
| Ububanzi bobubanzi bebha: | φ16-φ40 |
| Ijubane lokusika intambo | 32r/min |
| Ukusekela isivinini | 64r/min |
| Amandla emoto kagesi: | 2.4/3KW |
| Ukusika ibanga lokunyakaza kwekhanda: | 150mm |
| Ubukhulu bangaphandle(mm): | 1325×570×1070mm |
| Isisindo: | 537Kg |
Lo mshini usetshenziselwa ukusika intambo ukuze uqedele i-rebar ngemva kokuphonswa okubandayo.Futhi ungase usetshenziselwe ukugingqa intambo kanye nobude bebhawudi ngaphezu kuka-500mm, amabhawodi obude obungenamkhawulo.
3.Rebar Abashadile
Izinzuzo:
| l Isici se-Bar-break siqinisekisa ukuphakama kwe-ductile ngokugcwele.l Akukho ukuncishiswa kwendawo ye-bar cross-section. |  |
Amapharamitha we-Upsetting couplers ejwayelekile :
| Usayizi | Uchungechunge | D(±0.5)mm | L(±1) mm | P | Isisindo(Kg) |
| Φ16 | M20 | 26 | 40 | 2.5 | 0.09 |
| Φ18 | M22 | 29 | 44 | 2.5 | 0.114 |
| Φ20 | M24 | 32 | 48 | 3 | 0.16 |
| Φ22 | M27 | 36 | 52 | 3 | 0.207 |
| Φ25 | M30 | 40 | 60 | 3.5 | 0.32 |
| Φ28 | M33 | 44 | 66 | 3.5 | 0.398 |
| Φ32 | M36 | 50 | 72 | 4 | 0.62 |
| Φ36 | M39 | 56 | 80 | 4 | 0.875 |
| Φ40 | M45 | 62 | 90 | 4 | 1.138 |
Impahla ye-coupler ye-rebar iyinsimbi engu-No.45.
Umgomo wokusebenza:
1,Okokuqala, Sisebenzisa umshini wokusika we-GQ50 ukuze sihlanganise ekugcineni kwe-rebar.
2,Okwesibili, sisebenzisa umshini we-Upset Forging Parallel Thread Machine (GD-150 Automatic Machine) ukwenza isiphetho se-rebar.
3.Okwesithathu, sisebenzisa umshini wokusika i-Parallel Thread (GZ-45 Automatic Machine) ukuze ucuphe iziphetho ze-rebar ezenziwe.
4.Okwesine, i-coupler ecasulayo isetshenziswa ukuxhumanisa iziphetho ezimbili ze-rebar ngochungechunge oluhambisanayo.
UmhlanganoZuza
1. Asikho i-torque wrench edingekayo.
2. Umhlangano uqinisekiswe ngokuhlola okubonakalayo.
3. Ukwenziwa kwama-couplers ngaphansi kwezinhlelo eziqinile zekhwalithi.
4. Idizayini ejwayelekile ye-ISO Parallel Metric Thread.
Amazwana:
Ngokusho kwe-Chinese standard GB 1499.2-2007,
ye-rebar HRB400:Tensile strength≥54t0Mpa,Yeild strength≥400Mpa;
okwenzelwe kabusha i-HRB500:Amandla e-Tensile≥630Mpa,Amandla e-Yeild≥500Mpa.
Ubuchwepheshe bokuxhuma intambo ecasulayo abukwazi ukusetshenziselwa kuphela uxhumano lwe-HRB400, kodwa futhi nakweminye i-rebar, njenge-HRB500, amandla ayo okubamba angaphezulu kuka-700Mpa nokunye.
