I-MCJ Anchorage Terminator Coupler

Inkcazelo emfutshane:

I-1.Hebei Yida Anti Impact Rebar Coupling inkqubo yahlulwe ngezi ntlobo zilandelayo: (1) ACJ Standard Coupler 2.1 (2) BCJ Transition Coupler 2.2 (3) FCJ Positive and negative Thread Coupler 2.3 (J4) Adjust C. I-MCJ Anchorage Terminator Coupler 2.5 2. Intshayelelo Hebei Yida Anti Impact Rebar Inkqubo Coupling yinkqubo rebar mechanical splicing, yenziwe ngentsimbi esemgangathweni ophezulu ialloy.Sele iluphumelele uvavanyo lwe-Speed ​​​​Speed ​​​​Tensile ye-Anti impembelelo yangoko yiJamani Berl ...


  • FOB ixabiso:US $0.5 - 9,999 / Iqhekeza
  • Min.Ubungakanani boMyalelo:I-100 iqhekeza / amaqhekeza
  • Ubunakho bokubonelela:10000 Iqhekeza/Amaqhekeza ngenyanga
  • Izibuko:Shenzhen
  • Immimiselo yokuhlawula:L/C,D/A,D/P,T/T
  • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    1.Hebei Yida Anti Impact Rebar Coupling inkqubo is yahlulwe kwezi ntlobo zilandelayo:

    (1) ACJ iSibini esiPhakathi 2.1

    (2) BCJ Transition Coupler 2.2

    (3) FCJ I-Thread Coupler elungileyo kunye nengalunganga 2.3

    (4) KCJ Adjustable Coupler 2.4

    (5) MCJ Anchorage Terminator Coupler 2.5

    2. Intshayelelo

    I-Hebei Yida Anti Impact Rebar Coupling inkqubo yinkqubo ye-mechanical rebar splicing, yenziwe ngentsimbi esemgangathweni ophezulu.Sele idlulise uvavanyo lwe-Speed ​​​​Speed ​​​​Tensile ye-Anti impembelelo ekhawulezileyo yiJamani yaseBerlin BAM Laboratory.Isetyenziswe ngokubanzi kwiindawo apho kufuneka izinga eliphezulu lokuchasana nempembelelo.Umkhono we-coupler uya kudityaniswa ngokugqibeleleyo kunye ne-rebar nge-deformation ebanda kakhulu kwisicelo, kwaye ii-couplers ezimbini ziya kudityaniswa ngebholiti ephezulu yamandla.

    Izinto eziluncedo ezikhethekileyo:

    (1) I-rebar nganye idityaniswe yi-swaged ebandayo kunye ne-coupling, yayicutshungulwa ngumatshini omkhulu we-hydraulic we-tonnage kunye ne-mold ekhethekileyo yokwahlula ukuqinisekisa umgangatho ophezulu kunye nokuthembeka kwe-radial deformation swage.Uqhagamshelo lwe-rebar kunye ne-coupler emva kwe-swaged njengoko kubonisiwe kuMfanekiso 1.

     m1

    Umfanekiso woku-1

    (2) Ucinezelo lwebhondi yomkhono weRebar yenziwa ngaphambi koqhagamshelo lwesiza konga ixesha lendawo elixabisekileyo.

    (3) Imikhono emibini idityaniswe ngebholiti ephezulu, umgangatho uqinisekisiwe.

    (4) Ukufakela kwisiza kulula kwaye kuyakhawuleza, nakwiikheji ezixineneyo.Akukho kuhlolwa kweX-reyi efunekayo kwaye ukufakela kunokwenziwa kuyo nayiphi na imeko yemozulu.

    (5) Akukho kusikwa komsonto, akukho mfuneko yobushushu okanye ubushushu bangaphambili kwi-rebar, ngenxa yoko i-rebar igcina iimpawu zayo zangaphambili emva kwe-splice.

    (6) Inkqubo yokudibanisa i-yida ACJ rebar ime inzima okanye ixinene elipheleleyo kunye nemeko yoxinzelelo olupheleleyo.

    2.5 MCJ Anchorage Terminator Coupler

    I-MCJ Anchorage Terminator Coupler yenziwe ngumkhono omnye osemgangathweni, ibholithi enye eqhelekileyo, kunye ne-coupler enye ye-anchorage yesiterminator esisemgangathweni (njengoko kubonisiwe kuMfanekiso we-16), esetyenziselwa ukudibanisa phakathi kwe-rebar kunye ne-anchorage terminator coupler.Ingasetyenziswa xa kukho imfuneko yokusebenzisa i-anchorage terminator coupler ukudibanisa ne-rebar.

     m2

    Umfanekiso we-16

    Uphawu: I-MCJ Coupler isebenzisa umkhono oqhelekileyo, ibholithi eqhelekileyo ukwenza ibar eqhagamshelwe ne-anchorage terminator coupler ukuze ibe nokwanelisa imfuneko yempembelelo echaseneyo.

    I-Rebar kunye nemikhono eswayiweyo ikhoniction

    Ukusebenzisa umatshini owenziwe ngoxinzelelo olukhulu kunye nokungunda okukodwa okwahlulahlulayo ukuguqula imikhono, yenze umdibaniso ongenamthungo kunye ne-rebar kunye nobude be-swage kukuhlangabezana nobude obuqhelekileyo be-swage.Ubude be-swage obufutshane bunciphisa i-bond, ngelixa ubude be-swage ubude bunokunciphisa ubude bokudibana komsonto.

    Indlela yoFakelo lweSiza

    Inyathelo loku-1: Krwela ibholiti esemgangathweni kwi-coupler yabasetyhini ejikwe nge-rebar, de ingakwazi ukujija ngokuqhubekayo.Njengoko kubonisiwe kuMfanekiso 17.

     m3

    Umfanekiso we-17

    Inyathelo lesi-2: Krwela i-coupler ye-anchorage kwi-bolt eqhelekileyo, yenza i-anchorage terminator coupler ihlale inxibelelana nomntu obhinqileyo.Njengoko kubonisiwe kuMfanekiso 18.

     m4

    Umfanekiso we-18

    Inyathelo lesi-3: Ngoncedo lwezitshixo ezimbini zombhobho, qinisa uqhagamshelo ngokuguqula imikhono yomibini kwicala elichaseneyo ngaxeshanye.

     

     

     


  • Ngaphambili:
  • Okulandelayo:

  • Iimveliso ezinxulumeneyo