DCJ-40 Upset Forging Machine
Short Description:
Usage
The rebar upset forging machine uses the principle of cold heading to plastically deform the end of the steel bars to increase the diameter by 4 to 6 mm, and then processes the threads. The actual tensile strength of the joint area is higher than that of the original steel bar cross-sectional area, which greatly improves the tensile strength of the joint. This kind of threaded points after upsetting are all broken from the base material after tensile testing, and are suitable for HRB400 and HRB500 steel bars that comply with GB standard, ASTM A615 Gr.60 and Gr.75 steel bars, and ASTM A615, and B500B steel bars that comply with BS 4449, etc.
Features
The working mode is dual-pump operation. The low-pressure pump is responsible for system heat dissipation and cylinder speed-up. The high-pressure pump realizes the upsetting cylinder to push in advance and top the cylinder. The equipment has high working efficiency and can complete the upsetting of a single φ40 steel bar within 20 seconds.
The hydraulic system adopts a high-precision plunger pump to ensure stable system pressure and effectively improve the upsetting quality.
It is equipped with an integrated touch screen, which can set and monitor relevant data in real time.
The circular mold type is used to realize quick mold replacement.
It is equipped with a steel floating support device, which effectively supports the steel bars, and the height or support force can be adjusted at any time.
DCJ-40 Main Technical Parameters
| Applicable Rebar Range | 12mm–40mm |
| Upsetting Force | 2000kN |
| Clamping Force | 2500kN |
| Upsetting Efficiency | 20 PCS/S |
| Weight | 2400kg |
| Equipment Dimensions | 1900mm×1100mm×1980mm |
| Motor Power | 11/3kW |
| Working pressure | 30MPa |
| Maximum Pressure | 32 |
| Hydraulic tank capacity | 160L |
| Weight | 318kg |
| Out Dimensions | 1100mm×630mm×880mm |

0086-311-83095058
hbyida@rebar-splicing.com 








