Factory Cheap Hot Oil Tank Hose - GD-150 Upset Forging Machine – YIDA
Short Description:
Upset Forging Parallel Thread Technology Brief Introduction Of Upset Forging Parallel Thread System With the emergence of high-rise building, large-span space and special structures, the application of building rebar is developed towards big diameter, dense and high strength. The traditional rebar splicing technology such as welding and lapped splicing can not meet the requirements commendably in strength and saving cost. In this condition, as a new rebar connection technology, parallel...
Factory Cheap Hot Oil Tank Hose - GD-150 Upset Forging Machine – YIDA Detail:
Upset Forging Parallel Thread Technology
Brief Introduction Of
Upset Forging Parallel Thread System
With the emergence of high-rise building, large-span space and special structures, the application of building rebar is developed towards big diameter, dense and high strength. The traditional rebar splicing technology such as welding and lapped splicing can not meet the requirements commendably in strength and saving cost. In this condition, as a new rebar connection technology, parallel thread connection technology, especially the upset forging parallel thread connection technology is now more and more adopted in projects.
As an important parallel thread connection technology, the upset forging parallel thread connection technology posses following advantage:
1, Wide working range: adaptable for Φ12mm-Φ50mm same diameter, different diameter,
bending, new and old, advance covered up rebar of GB 1499, BS 4449, ASTM A615 or ASTM A706 standard.
2, High strength: stronger than the reinforcement bar and guarantees bar break under tensile stress(tensile strength of bar joint =1.1 times of bar’s specified tensile strength). It can satisfy the requirements stipulated in the Chinese standard JGJ107-2003, JG171-2005.
3, High efficiency: upset forging and threading one joint only needs no more than one minute, and handy operation and quick link.
4, Environmental protection and economy profit: no environment pollution, can work all day, not affected by weather, economize energy source and bar material
Processing Machine
1. (GD-150 Machine )Rebar End Upset Forging Parallel Thread Machine
Rebar diameter range: |
φ12-φ40 |
Oil pump flux: |
5L/min |
Rating power: |
<60Mpa |
Electric motor power: |
4KW |
Piston movement distance: |
100mm |
Out dimension(mm): |
1225×570×1100mm |
Weight: |
597Kg |
This machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end.
2. (GZ-45Machine )Steel bar Parallel Thread Cutting Machine
Rebar diameter range: |
φ16-φ40 |
Threading cutting speed |
32r/min |
Backing speed |
64r/min |
Electric motor power: |
2.4/3KW |
Cutting head movement distance: |
150mm |
Out dimension(mm): |
1325×570×1070mm |
Weight: |
537Kg |
This machine is used to cut the thread for rebar end after cold forging
3.Rebar Couplers
Advantages:
l Bar-break feature guarantees fully ductile elongation.
l No reduction of the bar cross-section area. |
The parameters of standard couplers designed for HRB400
Size |
Thread |
D(±0.5)mm |
L(±1) mm |
P |
Weight(Kg) |
Φ16 |
M20 |
26 |
40 |
2.5 |
0.082 |
Φ18 |
M22 |
29 |
44 |
2.5 |
0.114 |
Φ20 |
M24 |
32 |
48 |
3 |
0.153 |
Φ22 |
M27 |
36 |
52 |
3 |
0.207 |
Φ25 |
M30 |
40 |
60 |
3.5 |
0.303 |
Φ28 |
M33 |
44 |
66 |
3.5 |
0.398 |
Φ32 |
M36 |
50 |
72 |
4 |
0.608 |
Φ36 |
M39 |
56 |
80 |
4 |
0.875 |
Φ40 |
M45 |
62 |
90 |
4 |
1.138 |
Material of the rebar coupler is No.45 steel.
Assembly Benefit
1. No torque wrench required.
2. Assembly validated by visual inspection.
3. Manufacturing of couplers under strict quality plans.
4. Standard ISO Parallel Metric Thread design.
Remarks:
According to Chinese standard GB 1499.2-2007,
for rebar HRB400:Tensile strength≥540Mpa,Yeild strength≥400Mpa;
for rebar HRB500:Tensile strength≥630Mpa,Yeild strength≥500Mpa.
Working principle:
1,First,we use Upset Forging Parallel Thread Machine (GD-150 Machine) to forge the end of rebar.
2,Second we use Parallel Thread Cutting Machine (GZ-45 Machine) to thread the ends of the rebar which have been forged.
3.Third,a coupler is used to link the two ends of rebar in parallel thread.
The upset forging parallel thread connection technology can not only be used for the connection of HRB400,but also for other rebar, such as HRB500,those of whose tensile strength is higher than 700Mpa and so on.
Product detail pictures:
Related Product Guide:
Brief on Alloy Steel Round Bars
How to Save Time and Cost With a 316 Stainless Steel Bar
Our goal is usually to deliver high quality items at aggressive price ranges, and top-notch service to shoppers around the entire world. We're ISO9001, CE, and GS certified and strictly adhere to their high quality specifications for Factory Cheap Hot Oil Tank Hose - GD-150 Upset Forging Machine – YIDA, The product will supply to all over the world, such as: India, San Francisco, Hungary, Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.
By Elsa from Czech - 2016.06.19 13:51
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Elaine from Bulgaria - 2015.09.16 11:31