Factory For Single Sphere Flexible Connector - Torque Wrench – YIDA
Short Description:
Torque Wrench can be used to both install couplers and is for inspecting torque values by Inspector during construction of Rebar Mechanical Splice. After tightened the Rebar Mechanical Splice,inspectors need use torque wrench to check tightening torque of coupler with rebar , the minimum tighten torque values shall meet the following: Rebar Size (mm) ≦16 18-20 22-25 28-32 36-40 Tightening torque (N.m) 100 200 260 320 360
Factory For Single Sphere Flexible Connector - Torque Wrench – YIDA Detail:
Torque Wrench can be used to both install couplers and is for inspecting torque values by Inspector during construction of Rebar Mechanical Splice. After tightened the Rebar Mechanical Splice,inspectors need use torque wrench to check tightening torque of coupler with rebar , the minimum tighten torque values shall meet the following:
Rebar Size (mm) |
≦16 |
18-20 |
22-25 |
28-32 |
36-40 |
Tightening torque (N.m) |
100 |
200 |
260 |
320 |
360 |
Product detail pictures:
Related Product Guide:
What Is a Stainless Steel Bar?
Angle Steel Bar Can Be Cut To Different Needs
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory For Single Sphere Flexible Connector - Torque Wrench – YIDA, The product will supply to all over the world, such as: Southampton, Tanzania, Kenya, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Atalanta from Estonia - 2016.04.18 16:45
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Polly from Haiti - 2015.10.09 19:07