China Factory for Splicing Thread Rebar Coupler - FCJ system couplers – YIDA

Short Description:

1.Hebei Yida Anti Impact Rebar Coupling system is divided into the following types: (1)ACJ Standard Coupler 2.1 (2)BCJ Transition Coupler 2.2 (3)FCJ Positive and negative Thread Coupler 2.3 (4)KCJ Adjustable Coupler 2.4 (5)MCJ Anchorage Terminator Coupler 2.5 2. Introduction Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berli...


Product Detail

Product Tags

Related Video

Feedback (2)

Now we have superior devices. Our solutions are exported to your USA, the UK and so on, enjoying a superb name between customers for Building Material Steel Rebar Connection Threading Machinery , Thread Rolling Machine Price , Anchor Plate , We will do our best to meet your requirements and are sincerely looking forward to developing mutual beneficial business relationship with you!
China Factory for Splicing Thread Rebar Coupler - FCJ system couplers – YIDA Detail:

1.Hebei Yida Anti Impact Rebar Coupling system is divided into the following types

(1)ACJ Standard Coupler 2.1

(2)BCJ Transition Coupler 2.2

(3)FCJ Positive and negative Thread Coupler 2.3

(4)KCJ Adjustable Coupler 2.4

(5)MCJ Anchorage Terminator Coupler 2.5

2. Introduction

Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.

Special Advantages:

(1)Each rebar is connected by cold swaged with a coupling, It was processed by large-tonnage hydraulic machine and unique split mould to ensure high quality and reliable radial deformation swage. Connection of rebar with coupler after swaged as shown in Figure 1.

 9

Figure 1

(2)Rebar sleeve bond press is done prior to site connection saving precious site time.

(3)The two sleeves are connected through a high-strength bolt, quality ensured.

(4)Installation on site is easy and fast, even in dense cages. No X-ray check is needed and installation can be done in any weather conditions.

(5)No thread cutting, no need heat or pre-heat on rebar, hence the rebar retains its original characteristics after splice.

(6)The Yida ACJ rebar coupling system stands complex or full tension as well as full compression state.

2.3 FCJ Positive and Negative Thread coupler

FCJ Positive and Negative thread coupler is made up by one standard sleeve, one negative thread sleeve and one transition bolt(as shown in Figure 8),used for connection between two pieces of different diameter rebar. It is suitable for long rebar connections, or bended rebars where the rotation of the rebar is difficult or even impossible. Only one of the rebars must be movable on its axis. Through turning the bolt, two pieces of rebar can be loosen or tighten at same time.

10

Figure 8

Characteristic:FCJ Coupler can make two different diameter rebar connecting more efficient even the rotation of the rebar is difficult or even impossible 

Application Guide:

Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions.

Rebar And sleeves swaged connection

Using hydraulic machine and unique split mould to swage sleeve deformation, formed the seamless connection with rebar and the swage length is to meet the standard swage length. Shorter swage length reduces the bond, while longer swage length may shorten the engagement length of the thread.

Site Installation Method

Step 1:Make one sleeve swaged with rebar, another sleeve swaged with rebar, touch to the positive & negative bolt, As shown in Figure 9. 

 11

Figure 9

Step 2:When screw the bolt, make the two sides sleeve keep touch with bolt, can turn both two sides sleeve into the bolt, till the sleeves touch into the bolt convex plate. As shown in Figure 10.

 12

Figure 10

Step 3:With help of two pipe wrench,tighten the connection by turning both rebar / couplers in opposite direction at the same time.

 

 


Product detail pictures:

China Factory for Splicing Thread Rebar Coupler - FCJ system couplers – YIDA detail pictures


Related Product Guide:
Steel Square Bars For Your Roof
Brief on Alloy Steel Round Bars

We have been experienced manufacturer. Wining the majority of your crucial certifications of its market for China Factory for Splicing Thread Rebar Coupler - FCJ system couplers – YIDA, The product will supply to all over the world, such as: Munich, Nigeria, Roman, We'd like to invite customers from abroad to discuss business with us. We can provide our clients with high quality products and excellent service. We are sure that we will have good cooperative relationships and make a brilliant future for both parties.
  • Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
    5 Stars By Helen from Morocco - 2016.12.19 11:10
    This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
    5 Stars By Maggie from Hungary - 2016.11.12 12:31

    Related Products

    WhatsApp Online Chat !