0086-311-83095058
hbyida@rebar-splicing.com 
OEM/ODM Manufacturer Diesel Fuel Line - Torque Wrench – YIDA
Short Description:
Torque Wrench can be used to both install couplers and is for inspecting torque values by Inspector during construction of Rebar Mechanical Splice. After tightened the Rebar Mechanical Splice,inspectors need use torque wrench to check tightening torque of coupler with rebar , the minimum tighten torque values shall meet the following:
Rebar Size (mm)
≦16
18-20
22-25
28-32
36-40
Tightening torque (N.m)
100
200
260
320
360
OEM/ODM Manufacturer Diesel Fuel Line - Torque Wrench – YIDA Detail:
Torque Wrench can be used to both install couplers and is for inspecting torque values by Inspector during construction of Rebar Mechanical Splice. After tightened the Rebar Mechanical Splice,inspectors need use torque wrench to check tightening torque of coupler with rebar , the minimum tighten torque values shall meet the following:
|
Rebar Size (mm) |
≦16 |
18-20 |
22-25 |
28-32 |
36-40 |
|
Tightening torque (N.m) |
100 |
200 |
260 |
320 |
360 |
Product detail pictures:
Related Product Guide:
Steel Square Bars For Your Roof
How to Save Time and Cost With a 316 Stainless Steel Bar
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for OEM/ODM Manufacturer Diesel Fuel Line - Torque Wrench – YIDA, The product will supply to all over the world, such as: Cancun, Ghana, Belgium, "Good quality and reasonable price" are our business principles. If you are interested in our products or have any questions, make sure you feel free to contact us. We hope to establish cooperative relationships with you in the near future.
By Jodie from Oman - 2016.03.28 12:22
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Honey from Brasilia - 2015.09.29 17:23
